KabelDirekt – Pure Copper Stereo Audio Speaker Wire & Cable – Made in Germany – 2×2.5mm² – 20m – (For Hifi Speakers and Surround Sound Systems, Pure Copper, with polarity markings)

£24.00

  • Made in Germany: State-of-the-art manufacturing practices and rigorous standards ensure a flexible loudspeaker cable of the highest quality.
  • Made using the highest quality material: We use 0.2mm strands of pure copper and a durable yet flexible PVC sheath to achieve the exceptional signal quality and longevity.
  • Perfect sound quality: Connect your HiFi, home cinema or speaker system with high-end cables from KabelDirekt for an unforgettable sound experience.
  • Easy to install: With no stiff shielding material inside and a polarity marking on the outside, your KabelDirekt cable is both, thin and flexible as well as easy to install.
  • 36 months manufacturer warranty
Buy product
SKU: 998FE609 Category: Tag:

Additional information

Product Dimensions

17 x 17 x 8 cm, 1.28 Kilograms

Date First Available

5 July 2021

Manufacturer

KabelDirekt

Item model number

1310

Country of origin

Germany

Guaranteed software updates until

unknown

Average Rating

4.88

08
( 8 Reviews )
5 Star
87.5%
4 Star
12.5%
3 Star
0%
2 Star
0%
1 Star
0%
Add a review

Your email address will not be published. Required fields are marked *

8 Reviews For This Product

  1. 08

    by Rafal

    Good quality cables.

  2. 08

    by Amazon Customer

    This is high quality wire. Yes, you are paying a premium over similar options but it is worth that money in my humble naive opinion. All i know is that my 7.1 system sounds amazing and I’m sure the wiring helps with that.

  3. 08

    by alan dawe

    Nice guage for the money. Gives a nice balance of sound ,from deep bass through clear mids to crisp and clean highs. Very pleased and excellent value.

  4. 08

    by Andy

    Good price, good quality, I’m glad I chose this cable

  5. 08

    by S. Beasley

    I don’t buy into all this about different cables having different sounds. A speaker cable needs one thing, low resistance. This gives the amplifier control over the speakers and means minimal power loss. I could have used 2.5mm² twin and earth house wiring cable but that would have been hideous! This speaker cable is super flexible and with thin insulation isn’t hugely thick overall and looks good. Soldered very nicely to the plugs (I’d recommend soldering if you can for the best connection). Very happy for the price, which isn’t that much more than that unwieldy house wiring cable.

  6. 08

    by Andrew Braybrook

    1 bought 50 metres of 4mm2 OFC speaker cable to bi-wire my two rear surround speakers. Up to now they been using single-wired micro QED cable, which is about 1mm2, and meant that my Audio Pro Black Pearl v2 speakers weren’t sounding as good as when demoed in the shop.
    I needed about 12 metres of run from the amplifier, and you’re best off using the thickest cable you can get, hence 4mm2. Bi-wiring these might then be OTT, but better to over-do it. Measuring 50m of cable into quarters was an exercise in itself. I had to uncoil the cable and spread it out along the length of the house, and then some, so I was sure I had 4 equal lengths before cutting.
    I put a dab of silver solder on the cable ends to stop the strands from splaying, and connected the cable to Nakamichi banana plugs at the speaker end, joining 4 cables to 2 banana plugs at the amplifier end. One of each pair of cables is clearly-marked with a red stripe. I then used red heat-shrink wrap at the ends for that side, and the red plugs. I then used white heat-shrink wrap for the other pair of cables on one lead, and black for the other so that when you plug them in you know which cable is which.
    I did slip up slightly in that one should conventionally have the signal go in the direction of the writing on the wires. Once I cut the first pair though I just wired them up as they were, meaning one pair of wires was the wrong way round. After wiring it all up, and having put a dab of solder on the amp ends connecting them together I decided to leave it. I did reverse one of the second pair to correct the direction. Once run-in I don`t expect any issues.
    The sound of the new cables is much fuller than they were, definitely more bass is arriving at the speakers and they now sound like they did in the shop.
    The price of the these cables was around 20% of the cost of the speakers. Possibly the 2.5mm2 cables would have done the same job, I can`t tell. These 4mm2 cables are a little more future-proofed and do the job very well. The whole making and laying of the cables did take me around 4 hours. There was a delay as the banana plugs I had ready to take the paired wires at the amplifier end turned out to be too troublesome. You may need to select your plugs carefully that are taking 8mm2 of copper, many won’t. The ones I had took the cable OK but the pins turned out to be ever so slightly too big to fit in the amplifier sockets! I used a spare set.
    Very pleased with the results, the cables look smart, and feel pretty tough, and they sound fine. There might be 2 or 3% better-sounding cables if you want to spend 20 times the money, but for speakers that cost in hundreds of pounds rather than thousands I doubt you will hear better.

  7. 08

    by Amazon Customer

    good price for a good quality cable

  8. 08

    by Zvonimir Miric

    Good product. Easy to use and produces good sound quality.

Main Menu

KabelDirekt – Pure Copper Stereo Audio Speaker Wire & Cable – Made in Germany – 2x2.5mm² – 20m – (For Hifi Speakers and Surround Sound Systems, Pure Copper, with polarity markings)